XMax V3 Pro Starter Kit
XMAX V3 PRO is an on-demand convection vaporizer, used for both dry herbs and concentrates.
It is a portable pen vaporizer with a very compact size. The exterior of the vaporizer was made with high-quality aluminium material.
With TopGreen’s newest convection heating technology, the XMAX V3 PRO comes with 2 mode settings for better hits during vaping experience: Session mode and On-demand mode. People can use the V3 Pro with its session mode to automatically heat and maintain the temperature with a setting of 4 minutes or 6 minutes.
The V3 Pro has the convenience and ease-of-use that you would expect from any vaporizer on the market.
Holding the power button will heat up the device in On-demand mode, meaning there is no chance to waste any herb/concentrate material since it’ll only maintain the heat while you’re holding the power button, which is very helpful for vapers that just want a single hit or light uses once in a while.
Based on the convection technology, XMAX V3 PRO is greatly improved with the heating time, taking only 15 seconds to heat up to 180℃. Also reducing the waste of herb that other, slower burning vaporizers might cause. No vapor will be produced if you’re not inhaling.
The core concept that TopGreen products try to implement is to bless consumers with healthy, safe and easy-to-use products.
This vaporizer has been conceived, polished, tested and verified by the engineering team for 18 months. In order to bring better vaping experience and taste, this unit is designed with a cooling vapor-path using a stainless steel filter and cooling ceramic airflow box.
The isolated air-path avoids every odorous material to stop that plastic taste many vaporizers give you on your hits. The vapor will only touch stainless steel and ceramic material.
In order to make the device easier to clean, the mouthpiece designed with a scraping tool. (Note: Don’t use the mouthpiece scraping tool while your device is on. ) And the mouthpiece can be disassembled for deep cleaning.
For a better experience and more clarity on the settings, the unit comes with a large OLED screen in a slim body.
People can charge the device in 2 different ways. It can be charged with the provided USB-C cable or the battery cell can be removed and changed by the consumers themselves, then you can charge the battery cell on its own.
- Size: 150 x 24 x 27 mm
- Output Voltage: 3.2 – 4.2V
- Power Range: 11W – 16W
- Battery Capacity: 2600mAh
- 1x V3 Pro Device – in Black
- 1x Wax Cup
- 1x USB-C Cable
- 1x Cleaning Brush
- 1x User manual
- 4x Alcohol Cotton Pads
- 3x Cotton Swabs
Are you looking for a sleek and discreet vaporizer? You can use this vape almost anywhere without being noticed – it fits neatly into your purse or jacket pocket. If you’re looking for something compact, easy to use, and convenient, this checks all the boxes.
The battery life on the Xmax V3 Pro is excellent and makes it a great vape to carry around with you if you’re out all day and want to use it multiple times. Its a quality built – a solid device, with a good weight to it – not light and cheap plastic.
Standout features are the magnetic mouthpiece and the convection heating, which is not common on budget vapes, and typically found on vapes that are worth $200 and up. Loading up your vape is made really easy – the mouthpiece snaps apart and back on, with less force required, ensuring a perfect seal for every use. The ceramic airflow box in the mouthpiece to make sure you’re not burning any plastic.
Summary: Best value for the price, best introduction to convection vaporizer
Standout features: Xmax V3 Pro Mouthpiece, Xmax V3 Pro Battery (replaceable)
Usability: Heats up to 350 Fahrenheit, in 10 seconds, and a 1 inch OLED screen (very bright screen) that includes battery mode and temperature, 3 clocks to turn on, hit the lower button to reduce temperature up and down buttons to reduce or increase temperature.The coffee icon indicates the device is heating up, you can go up to 420 Fahrenheit, and it will create more vapor but you definitely don’t have to go that high, this is a personal preference.
Battery: It’s recommended to charge this vaporizer for a few hours when your first receive it, but it may only require a charge of one hour to when its fully charged. The battery is a replaceable lithium ion 18650 battery which is adequate and will last 6 bowls on average.
City Vaporizer sells a 3000 mA LG/Samsung high quality replacement batteries that will give you longer lasting session time, vs the 2600 mA battery that the device comes with.
Temperature Settings: If you vape under 325f you’re not likely to feel anything. You can think of 325-350f as the low range of temperature to slightly toast the cannabis, producing significantly less vapor, but for some a more enjoyable experience. If you want more vapor you must go higher.
Convection vs Conduction Vapes: Two methods that vapes typically use: one is convection and one is conduction. Convection is like heat waves, similar to baking something in the oven. The other method conduction – its like putting patties on the grill, there’s direct contact heating up the herb. This v3 pro uses convection which is a method typically used in higher end vaporizers. It can be the difference between the herb tasting like its being cooked vs burned – a different experience.
Overall Impressions: The XMAX Pro V3 Very solid product for the price. Features typically found on higher end vaporizers, excellent price point, and very convenient design. This is another great product from Topgreen Technologies.
- XMAX V3 Pro Manual
- TopGreen Technology – For Warranty and Questions – Submit a Manufacture Support Ticket
- CityVaporizer – Submit a Retailer Support Ticket
- CityVaporizer – Veteran’s Insurance Claim Information
How do I use the Xmax V3 Pro?
Three Clicks of the Power Button to turn it on, three clicks of the power button to shut it down
How do I pack xmax v3 pro vaporizer?
The vape will hold about .15 grams of weed. You can pack more into the chamber with some pressure but our recommendation would be not too to overload it because you will need to stir the bowl after a draw or two. Use an acrylic or aluminum grinder to grind your herb to a medium coarsely chopped consistency.
How long does the Xmax V3 Pro take to charge?
It takes 5 hours to fully charge the unit from a fully depleted battery. Once again having a strong USB charger definitely helps.
How do I clean my Xmax V3 Pro?
It’s literally as simple as using a q-tip with alcohol. We always recommend using as close to 100% ISO alcohol as possible as you don’t want too much of water in your ISO alcohol.
Where is the best place to purchase in the USA?
Buy direct from City Vaporizer. We are the largest authorized distributor and retailer of the brand globally. We do not sell through Amazon.
External Video Review
External Video Review
|Power Supply||Replaceable battery|
|Battery Life||6 bowls/on average|
|Heat Time||30 seconds|
|Temperature||50C – 220C (122-350 Fahrenheit)|
|Compatibility||Dried Herb and concentrates|