DynaVap M7
DynaVap M7 Case
DynaVap M7 Pieces
DynaVap M7
DynaVap M7 Case
DynaVap M7 Pieces

DynaVap M7

USD $89.00

FREE SHIPPING PROMO

The DynaVap M7 is a pocket-size, battery-free dry herb vaporizer made entirely of stainless steel in the USA.

  • No battery or electronics, heat it with a torch or induction heater
  • Captive Cap clicks when it reaches vaporization temperature
  • Finless Tip with up to 20% less heat transfer to the stem
  • Plugs into a 10mm water pipe
  • About 0.1g bowl, includes a tin case, Pink Slip and DynaTorch
Fast Shipping

1-5 business days* USA & Canada

Warranty

We are an Authorized Reseller
Full warranty included

In stock

Description

DynaVap M7 XL: The Battery-Free Dry Herb Vaporizer With a Cooler Draw

The DynaVap M7 XL is the longer version of the M7, DynaVap’s flagship manual vaporizer. It is made entirely of medical-grade stainless steel in the USA, with no battery and no electronics. Heat the cap with a torch until it clicks, then draw. The XL length gives you a better grip and a longer vapor path, so every hit comes out cooler.

Genuine DynaVap product · Made in the USA · Live USD price: $89.00
Price checked October 15, 2026

No batteryTorch or induction heat
~0.1g bowlHalve it with adjust-a-bowl
6 settingsAdjustable airflow
10.8 cmXL length, 26 grams

Why People Pick the DynaVap M7 XL

  • Nothing to charge: no battery or electronics, so it is always ready and nothing wears out.
  • Cooler draws: the XL body adds length between the hot tip and your mouth.
  • The click: the Captive Cap clicks when it reaches vaporization temperature, then clicks again as it cools.
  • Bigger rips: the M7 Tip has more mass, so it holds heat for stronger one-hit extractions.
  • Cooler grip: the Finless Tip cuts heat transfer to the stem by up to 20%.
  • Your airflow: six condenser settings let you tune each draw from airy to dense.

How to Use the DynaVap M7 XL

  1. Remove the cap from the tip.
  2. Load your ground dry herb into the tip chamber.
  3. Replace the cap on the tip.
  4. Heat the cap with a torch or induction heater until it clicks, about 5–7 seconds with a torch.
  5. Inhale slowly from the mouthpiece end.
  6. Wait for the second click as the cap cools down.
  7. Reheat for more extraction, or empty the tip when your herb is done.

Tip: rotate the tip slowly in the flame so it heats evenly, and use the adjust-a-bowl to cut the chamber in half when you want a smaller dose.

Six Airflow Settings

The M7 XL condenser sits at one of six depths inside the mouthpiece. Each setting changes how much air mixes with the vapor. DynaVap’s “Pivot” style rocker and airport design make the change quick, so you can try a few settings until a hit feels right.

Heat Source

Virtually any heat source works, but DynaVap recommends a butane torch or an induction heater for the best flavor. The M7 XL works with DynaVap’s YLL and Wand induction heaters and the DynaCoil. The included DynaTorch ships empty, so pick up butane or a refillable torch from our torches and lighters.

DynaVap M7 vs M7 XL vs HyperDyn

M7 XL M7 HyperDyn
Price (USD) $89.00 $89.00 Not stocked
Length 10.8 cm 9.1 cm 10.8 cm
Weight 26 g 17.3 g 31 g
Bowl ~0.1g ~0.1g ~0.25g
Material Stainless steel Stainless steel Titanium
Heating Hybrid Hybrid Conduction
Best for Cooler draws and an easier grip The most pocketable M Bigger bowls

Specs as listed by DynaVap.

DynaVap M7 XL vs Battery-Powered Dry Herb Vaporizers

DynaVap M7 XL XMAX V3 Pro Arizer Solo 2 MAX Pulsar APX V3
Price (USD) $89.00 $79.95 $134.99 $56.99
Power None (torch or induction) Replaceable 18650 battery Built-in battery Built-in battery
Heating Hybrid, heated by flame Convection Ceramic Ceramic
Temperature control By feel, cap clicks when ready 1° steps 1° steps 5 settings
Best for No charging, ever On-demand hits on a budget Long battery life and glass flavor A low price and simple use

Cleaning and Care

  • Wipe the tip and stem with the included Pink Slip cleaning tab.
  • For a deep clean, take it apart and clean the stainless steel parts, then let everything dry fully.
  • Replace the CCD screen when it clogs; DynaVap sells replacement screens.
  • Let the tip cool before you handle or pack it away.

Good to Know Before You Buy

  • Heat source needed: the DynaTorch ships empty, so you will need butane.
  • Learning curve: expect a few sessions to learn your timing and airflow.
  • Small bowl: about 0.1g, so reload for longer sessions.
  • Dry herb only: it is built for flower, not concentrates.

DynaVap M7 XL Specifications

Spec DynaVap M7 XL
Material Medical-grade stainless steel
Power Battery-free, no electronics
Heating Hybrid (convection and conduction)
Heat source Butane torch or induction heater
Heat time About 5–7 seconds with a torch, until the cap clicks
Bowl size About 0.1g (halved with the adjust-a-bowl)
Airflow 6 condenser settings
Length 10.8 cm
Weight 26 grams
Made in USA
Compatible cases DynaStash XL, SlimStash XL, SlingStash (tube removed)

What’s in the Box

  • 1 × DynaVap M7 XL
  • 1 × DynaVap Tin Case
  • 1 × Pink Slip Cleaning Tab
  • 1 × DynaTorch (single flame, ships empty)

Helpful Resources

DynaVap M7 XL FAQ

What is the DynaVap M7 XL?

The DynaVap M7 XL (styled "M 7 XL") is the longer version of the M7, DynaVap's flagship battery-free dry herb vaporizer. It is made entirely of medical-grade stainless steel in the USA, has no electronics, and is heated with a torch or induction heater until the cap clicks.

Is the DynaVap M7 XL worth it?

If you want a vaporizer that never needs charging and is built to last, yes. You get all stainless steel construction, six airflow settings and cooler draws than the standard M7. The trade-off is that you need a torch or induction heater, and there is a short learning curve.

DynaVap M7 vs M7 XL: what is the difference?

Both use the same M7 Tip, Captive Cap and roughly 0.1g bowl. DynaVap lists the M7 XL at 10.8 cm and 26 grams versus 9.1 cm and 17.3 grams for the M7. The XL uses the M XL condenser assembly and mouthpiece, which gives you more to hold and a longer path for the vapor to cool.

How do I use the DynaVap M7 XL?

Remove the cap, load ground herb into the tip, and put the cap back on. Heat the cap with a torch or induction heater until it clicks, which takes about 5 to 7 seconds with a torch. Inhale from the mouthpiece. The cap clicks again as it cools, and you can reheat for another cycle.

How do I adjust the airflow on the M7 XL?

Set the condenser to a different depth inside the mouthpiece. There are six settings, and each one changes how much air mixes into the draw, so you can go from airy to dense hits.

Is DynaVap conduction or convection?

Both. DynaVap lists the M7 XL as hybrid heating, using convection and conduction, and says the redesigned cap fit increases convection heating compared with previous models.

How do I get bigger hits from the M7 XL?

Grind your herb and fill the tip without packing it hard. Heat until the cap clicks, then draw slowly and steadily. Close down the airflow with the condenser for denser vapor, and reheat for a second cycle to finish the bowl.

Do I need a torch for the M7 XL?

You need a heat source. DynaVap recommends a butane torch or an induction heater for the best flavor. The kit includes a single-flame DynaTorch that ships empty, so you will need butane. DynaVap's YLL and Wand induction heaters also work.

How do I clean the DynaVap M7 XL?

Use the included Pink Slip cleaning tab for regular wipe-downs. For a deeper clean, take the vaporizer apart, clean the stainless steel parts, and let everything dry fully before you put it back together. Replacement CCD screens are available from DynaVap.

What cases fit the DynaVap M7 XL?

The M7 XL comes with a DynaVap tin case. DynaVap also lists the DynaStash XL, SlimStash XL and SlingStash (with the tube removed) as compatible.

Can the DynaVap M7 XL do concentrates?

DynaVap sells and describes the M7 XL as a dry herb vaporizer. For concentrates, look at an electric dab rig or a wax pen instead.